-
TWO BREECHING INTET VALVES
2 Breeching Intet Valves manufactured in accordance with BS5041 Part 3, complete with non-return valve, rubber dust cap, 25mm drain valve, cap and chain as standard. They are designed to fit in the dry riser inlet cabinet providing feed of water in an emergency situation to the dry riser outlet valves sited on each floor of the building.
- Colour: Red RAL3002
- Inlet Connection: 2 x 2½” Instantaneous male to BS336 with non-return
- Inlet Cap and chain
- Outlet Connection: See Options Below
- Body Material: Cast Iron
- Drain: 1″ to BS5154 with blank cap and chain
- Standard: BS5041 : Part 3
₵4,500.00TWO BREECHING INTET VALVES
₵4,500.00 -
ASENWARE EXTINGUISHING CONTROL PANEL
ASENWARE EXTINGUISHING CONTROL PANELProduct overviewThe AW-GEC2159 Automatic gas extinguishing control panel is a combined fire alarm control panel and extinguishing system and has 4 detection zones, any or all of which are capable of contributing to the extinguishing release decision.
Gas fire extinguishing controller for use in gas automatic fire extinguishing system, automatic detection, automatic alarm, automatic fire extinguishing controller, gas fire extinguishing controller can connect to the smoke and heat detector, the emergency stop button, automatic transfer switch, spray gas lamp, sound and light alarm devices, such as provide drivers and electromagnetic valve, used to start the gas fire extinguishing equipment.Product FeaturesFeatures:
1. Emergency stop: In delay time and found to have abnormal situation, does not need to start the fire extinguishing system, according to the manual control box or gas extinguishing controller of the emergency stop button, can prevent controller extinguishing instruction.
2. Networking: Gas fire extinguishing controller also can connect with fire alarm controller, a remote control.3. Application:
a)Electrical and electronic equipment;
b) Can burn liquid and can melt the solid fire;
c) Solid surface fire;
d)Can cut off the gas source gas fire extinguishing before.₵8,500.00ASENWARE EXTINGUISHING CONTROL PANEL
₵8,500.00 -
CONVENTIONAL FLAME DETECTORS
CONVENTIONAL FLAME DETECTORS
Model IFD-E is an IR³ flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion.
The detector discrimnates between flames and other light sources by responding only to particular optical wavelengths and flame flicker frequencies. This enables the detector to avoid false alarms due to such factors as flickering sunlight, Ideal for the detection of flames from the burning of Aviation Fuels (kerosene), Butane, Grain & Feeds, Hydrogen, Paper, Natural Gas, Petrol (gasoline) etc.
- Unaffected by convection currents, draughts or wind and solar-blind
- Tolerant of fumes, vapours, dust and mist
- Responsive to a flame more than 25 m away
- Selectable response speed
- Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting)
- Optical self-test
- SIL capable
₵4,500.00CONVENTIONAL FLAME DETECTORS
₵4,500.00 -
-
FIRE FIGHTING JET NOZZLE
FIRE FIGHTER JET NOZZEL
The ultimate CAFS nozzle, the SaberJet is truly multi-purpose. The Dual Shutoff (DSO) allows you to flow both solid bore and fog stream at the same time.
Features
- Operates at pressures from 50-100psi, allowing you to reduce firefighter fatigue or opt for maximum flow
- Fog flow at 100psi (7 bar): 135 GPM (510 LPM)
- Comes with pistol grip
- Compatible with Quick-Attack Foam Tube Style 793
Specifications
Style 1528 Weight 6 1/2 lbs (2.9 kg) Type Combination Fog/Smooth Bore Material Pyrolite Brand SaberJet Swivel Inlet 2 1/2” or 1 1/2” (65 mm or 38 mm) Length 11 5/8” (295 mm) Width 4 1/2″ (114 mm) Height 8 3/4″ (222 mm) Akron Brass Style 1528 Dual Shut-off SaberJet Nozzle Specification: A combination solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. The solid bore shall have field changeable tips with orifice size of 1-1/8″, and the fog shall flow 135 gpm @ 100 psi or 510 lpm @ 7 bar. The nozzle shall have a pistol grip, spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet. The bale shutoff of the smooth bore shall be with dual drive trunnions. The nozzle shall also be constructed of lightweight Pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 10 year warranty and meet NFPA 1964.₵4,500.00FIRE FIGHTING JET NOZZLE
₵4,500.00 -
EMERGENCY KEY BOX
EMERGENCY KEY BOX
About this item
- 200 POSITION KEY BOX: Keep your keys organized and safe in this key lock box. The key cabinet features a hook-style design with numbered shelves and an added sleeve that fits 200 individual keys so you can quickly and conveniently locate the one you need. The lock box comes with two external keys and a secure lock to keep your keys safe and concealed.
- KEY TAGS & ACCESSORIES: The key storage lock box comes with 200 key tags with labels in five colors, along with eight bonus 3″ x 3″ sticky note pads for easy sorting and organization.
- HEAVY-DUTY DESIGN: Made from heavy-duty 1mm-thick galvanized steel with a black powder coated finish to prevent rust. This cabinet lock box is suitable for use in your garage or office. The lock box weighs 19 lbs and is 15″ L x 5.5″ W x 21.5″ H.
- WALL MOUNTED: This sturdy key lock box can be placed on a table, shelf, or mounted to a wall. The key storage lock box has pre-drilled mounting holes and comes with mounting hardware for quick and secure installation.
- VERSATILE USE: Use this key cabinet box for your home or business. The safety key box is ideal for valets, property and rental management complexes, hotels, car dealerships, car lots, auto repair shops, and more.
₵1,500.00EMERGENCY KEY BOX
₵1,500.00 -
HANDING TYPES fm200
HANDING TYPES fm200
An FM 200 fire suppression system is a clean agent fire suppression solution that uses a colorless, odorless gas called FM-200 (heptafluoropropane) to extinguish fires. Unlike water-based systems, FM 200 systems are designed to quickly suppress fires without causing damage to sensitive equipment or leaving any residue.
How Do FM 200 Fire Suppression Systems Work?
FM 200 systems are designed to detect and suppress fires in their early stages. Here’s a step-by-step look at how they operate:
- Detection: Advanced smoke and heat detectors continuously monitor the protected area. If they detect a fire, the system is activated.
- Activation: Upon activation, the FM-200 gas is rapidly discharged into the room or enclosed space. This typically happens within 10 seconds.
- Suppression: The FM-200 gas absorbs the heat from the fire and disrupts the chemical reaction occurring in the flames. This effectively extinguishes the fire.
- Ventilation: After the fire is suppressed, ventilation systems are used to clear the FM-200 gas from the area, making it safe for re-entry.
Benefits of FM 200 Fire Suppression Systems
There are several key advantages to using an FM 200 system over traditional fire suppression methods:
Rapid Response
FM 200 systems can suppress a fire in seconds, significantly reducing the potential for damage and downtime.
Equipment Safety
Since FM-200 is a clean agent, it won’t harm sensitive electronics, valuable documents, or other critical assets. This makes it ideal for use in data centers, archives, and museums.
No Residue
Unlike water or foam-based extinguishers, FM-200 leaves no residue behind, eliminating the need for extensive clean-up after a discharge.
Safe for Occupied Spaces
FM 200 is non-toxic at concentrations used for fire suppression, making it safe for use in areas where people are present.
Applications of FM 200 Gas Suppression Systems
FM 200 systems are versatile and can be used in various environments, including:
- Data Centers: Protecting servers and networking equipment from fire without damaging the electronics.
- Telecommunication Facilities: Ensuring uninterrupted communication by safeguarding equipment.
- Archives and Libraries: Preserving valuable documents, books, and artifacts.
- Healthcare Facilities: Protecting sensitive medical equipment and records.
- Museums and Art Galleries: Ensuring that irreplaceable artworks and exhibits are not damaged by fire suppression efforts.
Choosing the Right FM 200 System
When selecting an FM 200 fire suppression system, it’s essential to work with a knowledgeable provider who can tailor the system to your specific needs. Here are some factors to consider:
- Room Size and Layout: The size and configuration of the space will determine the amount of FM-200 gas needed and the placement of nozzles.
- Type of Assets: Different assets may have varying protection requirements.
- Regulatory Compliance: Ensure that the system meets all relevant fire safety regulations and standards.
Maintenance and Inspection
Regular maintenance and inspection of your FM 200 fire extinguishing systems are crucial to ensure they function correctly in an emergency. This typically involves:
- Routine Checks: Regularly scheduled inspections by qualified technicians.
- System Testing: Periodic testing to verify that detectors, alarms, and discharge mechanisms are operational.
- Refilling and Servicing: Ensuring that the FM-200 gas cylinders are fully charged and ready for use.
₵7,500.00HANDING TYPES fm200
₵7,500.00 -
SAFETY PADLOCKS
SAFETY PADLOCKSProduct DescriptionBrandMaster Lockproduct typePadlocksproductMaster Lock Laminated Steel Padlock- Brass (40mm)product useSecure gates and fencesSecure garages₵100.00SAFETY PADLOCKS
₵100.00 -
6kg ABC DRY POWDER FIRE EXTINGUISHER
6kg ABC Dry Powder Fire extinguisher is designed for enclosed areas such as engine/plant rooms etc. It contains dry powder extinguishant which covers most fires involving wood/paper, flammable liquids and electrical fires. The heat-sensitive glass bulb bursts when the temperature rises to 68°C. Recommended mounting height: 2m.
₵350.00 -
LANDING VALVES
LANDING VALVES
Dry Riser Outlet / Landing Valves
Dry Riser Valves, manufactured in accordance with BS 5041 Part 2, complete with cap and chain, instantaneous BS 336 outlet, safety strap and padlock for security.
- Manufactured in accordance with BS 5041 Part 2
- Body Material: Bronze
- Outlet: 2½” female instantaneous to BS 336.
- Inlet: See Options below
- Working Pressure: <20 bar.
- Blank plugs and chains are also available
₵2,500.00LANDING VALVES
₵2,500.00