Recommended Items
-
-
-
Safetoe mining boots
waterproof S3 boots for mining and all construction industries
contact: 0246414328
₵550.00Safetoe mining boots
₵550.00 -
Sneaker safety shoe
Steel toe, anti puncture, slip resistant, light weight and comfy.
contact: 0246414328
₵360.00Sneaker safety shoe
₵360.00
Best Seller Items
-
-
-
Safetoe mining boots
waterproof S3 boots for mining and all construction industries
contact: 0246414328
₵550.00Safetoe mining boots
₵550.00 -
Sneaker safety shoe
Steel toe, anti puncture, slip resistant, light weight and comfy.
contact: 0246414328
₵360.00Sneaker safety shoe
₵360.00
-
HANDING TYPES fm200
HANDING TYPES fm200
An FM 200 fire suppression system is a clean agent fire suppression solution that uses a colorless, odorless gas called FM-200 (heptafluoropropane) to extinguish fires. Unlike water-based systems, FM 200 systems are designed to quickly suppress fires without causing damage to sensitive equipment or leaving any residue.
How Do FM 200 Fire Suppression Systems Work?
FM 200 systems are designed to detect and suppress fires in their early stages. Here’s a step-by-step look at how they operate:
- Detection: Advanced smoke and heat detectors continuously monitor the protected area. If they detect a fire, the system is activated.
- Activation: Upon activation, the FM-200 gas is rapidly discharged into the room or enclosed space. This typically happens within 10 seconds.
- Suppression: The FM-200 gas absorbs the heat from the fire and disrupts the chemical reaction occurring in the flames. This effectively extinguishes the fire.
- Ventilation: After the fire is suppressed, ventilation systems are used to clear the FM-200 gas from the area, making it safe for re-entry.
Benefits of FM 200 Fire Suppression Systems
There are several key advantages to using an FM 200 system over traditional fire suppression methods:
Rapid Response
FM 200 systems can suppress a fire in seconds, significantly reducing the potential for damage and downtime.
Equipment Safety
Since FM-200 is a clean agent, it won’t harm sensitive electronics, valuable documents, or other critical assets. This makes it ideal for use in data centers, archives, and museums.
No Residue
Unlike water or foam-based extinguishers, FM-200 leaves no residue behind, eliminating the need for extensive clean-up after a discharge.
Safe for Occupied Spaces
FM 200 is non-toxic at concentrations used for fire suppression, making it safe for use in areas where people are present.
Applications of FM 200 Gas Suppression Systems
FM 200 systems are versatile and can be used in various environments, including:
- Data Centers: Protecting servers and networking equipment from fire without damaging the electronics.
- Telecommunication Facilities: Ensuring uninterrupted communication by safeguarding equipment.
- Archives and Libraries: Preserving valuable documents, books, and artifacts.
- Healthcare Facilities: Protecting sensitive medical equipment and records.
- Museums and Art Galleries: Ensuring that irreplaceable artworks and exhibits are not damaged by fire suppression efforts.
Choosing the Right FM 200 System
When selecting an FM 200 fire suppression system, it’s essential to work with a knowledgeable provider who can tailor the system to your specific needs. Here are some factors to consider:
- Room Size and Layout: The size and configuration of the space will determine the amount of FM-200 gas needed and the placement of nozzles.
- Type of Assets: Different assets may have varying protection requirements.
- Regulatory Compliance: Ensure that the system meets all relevant fire safety regulations and standards.
Maintenance and Inspection
Regular maintenance and inspection of your FM 200 fire extinguishing systems are crucial to ensure they function correctly in an emergency. This typically involves:
- Routine Checks: Regularly scheduled inspections by qualified technicians.
- System Testing: Periodic testing to verify that detectors, alarms, and discharge mechanisms are operational.
- Refilling and Servicing: Ensuring that the FM-200 gas cylinders are fully charged and ready for use.
₵7,500.00HANDING TYPES fm200
₵7,500.00 -
Gasoline plate compactor
Engine power:4.8Kw(6.5HP)
Weight:90Kgs
Frequency:4200VPM
Centrifugal force:15kN
Compaction depth:30cm
Travel speed:45cm/s
Efficiency:660M2/Hr
Plate size:50x45cm
Packed by carton box₵7,645.00Gasoline plate compactor
₵7,645.00 -
Gasoline power trowel
Gasoline engine
Engine power:4.8kW(6.5HP)
Weight:56kg
With iron pan
Rotor diameter:57cm(22-7/16″)
Blade number:Four
Finish blade:23X12cm(9*4-3/4″)
Packed by carton box₵7,860.00Gasoline power trowel
₵7,860.00 -
Retractable fall arrester
Casing made up of high strength and sturdy Aluminum Alloy.
Comes in 25mm Width Webbing.
Includes two Scaffold Hooks PN 131 at anchorage ends.
Anchorage Eye has swivel action, prevents undue twist of rope while working or in the event of a fall.
Use : To be used wherever the user needs a greater freedom of movement and needs to pass obstacles while remaining anchored at all times.
Conforms to EN 360:2002₵8,000.00Retractable fall arrester
₵8,000.00 -
Tile cutter
Voltage:220-240V~50Hz
Input power:2000W
No-load speed:2950rpm
Blade size:300mmx25.4mm
Table size:1260mmx486mm
Max.cutting width:1200mm
Max.cutting depth:
90 degree:65mm
45 degree:48mm
Saw body tilting range:0°-45°
Worktable bevel range:0°-45°
Packed by carton box₵8,215.00Tile cutter
₵8,215.00 -
Gasoline generator
Rated voltage(V):220-240
Rated frequency(Hz):50
Max.output(kW):5.5
Rated output(kW):5.0
Rated speed(rpm):3000
Engine:4 stroke,OHV
Displacement(ml):389
Cooling system:Air-cooled
Ignition system:T.C.I
Starting system:Recoil+Electric
Copper wire alternator
Fuel tank(L):25
Dry weight(Kg):77
With 1 set auxiliary handle and wheels
Packed by carton box – 69.0cm x 55.0cm x 56.0cm(H)
₵8,429.70₵8,430.00Gasoline generator
₵8,429.70₵8,430.00 -
FIRE EXTINGUISHING CONTROL PANEL
Item specifics
-
Condition
-
-
Brand
-
Ravel
-
Type
-
Fire Alarms
-
Model
-
Fire Alarm Control Panel
-
MPN
-
2554
-
Country/Region of Manufacture
-
India
Item description
Fully complies with UL -864 and NFPA-72.
- Rugged CRCA sheet with powder coated finish.
- Operates on 110 – 220VAC 50 /60 Hz, AC mains power supply.
- 16×2 Dot Matrix LCD display.
- 4/8 Class B Style ?B ? or Style ?C? Initiating Device Circuit (IDC).
- All zones accept smoke detectors and normal open contact devices.
- Any zone can be configured as alarm or supervisory zone.
- 2 Class B Notification Appliance Circuits (NAC).
- NAC shall be programmed as silenceable or non-silenceable.
- Supervisory zone shall be latching or resettable.
- Standby (battery) backup 24VDC power supply with built in charger.
- Error free Fire / Fault status in unambiguous colored LED indication.
- System ON indication.
- Main & Standby status with audible and visual indication.
- Battery low visual warning with audible tone.
- Form C relays for fire, fault and supervisory.
- Resettable / Steady 24VDC Output.
- RS 485 Communication facility (Optional).
- Lamp test facility.
- All field wiring circuits are power limited except 110-220VAC and battery.
- All field wiring circuits are supervised.
- Walk test facility.
- Zone isolation facility with loop voltage cut off.
- Earth fault annunciation facility at 0 ohms.
- AC low voltage cutoff.
- Programmable AC loss delay.
- Programmable alarm verification.
- Programmable trouble reminder.
Special Features
- Switched Mode Power Supply.
- Modular Construction.
- Auto Resettable Fuse.
- Surge Protection for all Input and outputs.
- Battery polarity reversible protection.
- Surface Mount Technology.
- Over all current consumption is low.
₵8,500.00FIRE EXTINGUISHING CONTROL PANEL
₵8,500.00 -
-
-
ASENWARE EXTINGUISHING CONTROL PANEL
ASENWARE EXTINGUISHING CONTROL PANELProduct overviewThe AW-GEC2159 Automatic gas extinguishing control panel is a combined fire alarm control panel and extinguishing system and has 4 detection zones, any or all of which are capable of contributing to the extinguishing release decision.
Gas fire extinguishing controller for use in gas automatic fire extinguishing system, automatic detection, automatic alarm, automatic fire extinguishing controller, gas fire extinguishing controller can connect to the smoke and heat detector, the emergency stop button, automatic transfer switch, spray gas lamp, sound and light alarm devices, such as provide drivers and electromagnetic valve, used to start the gas fire extinguishing equipment.Product FeaturesFeatures:
1. Emergency stop: In delay time and found to have abnormal situation, does not need to start the fire extinguishing system, according to the manual control box or gas extinguishing controller of the emergency stop button, can prevent controller extinguishing instruction.
2. Networking: Gas fire extinguishing controller also can connect with fire alarm controller, a remote control.3. Application:
a)Electrical and electronic equipment;
b) Can burn liquid and can melt the solid fire;
c) Solid surface fire;
d)Can cut off the gas source gas fire extinguishing before.₵8,500.00ASENWARE EXTINGUISHING CONTROL PANEL
₵8,500.00 -
Self-leveling rotary laser level
Green laser beams
Working Range: indoor 50m, outdoor 300m (with laser detector)
Remote control distance: 20m
Beam accuracy: ±0.1mm/m
Line accuracy ±1.5mm at 5 m
Leveling time<3s
Self-leveling range: ±5°
Protection level: IP65
Laser Class II
Rotational speed: 0,60,120,300,600rpm
Rotational coverage: 0°,10°,45°,90°,180°,360°
Setting slope: ±5°
Laser power supply: DC 4.8-6V Ni-MH rechargeable or 4C type alkaline
Packed by plastic box₵8,599.80₵8,600.00Self-leveling rotary laser level
₵8,599.80₵8,600.00 -
Gasoline generator
Rated voltage(V):220-240
Rated frequency(Hz):50
Max.output(kW):6.5
Rated output(kW):5.0
Rated speed(rpm):3000
Engine:4 stroke,OHV
Displacement(mL):420
Cooling system:Air-cooled
Ignition system:T.C.I
Starting system:Recoil+Electric
Copper coil alternator
Fuel tank(L):25
Dry weight(kg):80
With 1 set auxiliary handle and wheels
Packed by carton box₵8,860.00Gasoline generator
₵8,860.00 -
Inverter MMA welding machine
IGBT Inverter technology
Input voltage(V):380-400
Phase:Three
Frequency（HZ）:50/60
Output current(A):20-630
Duty cycle(%):630A@60%
No-load voltage(V):85
Max.output current(A):630
Diameter of electrode(mm):2.5-6.0
Packed by carton box₵8,930.00Inverter MMA welding machine
₵8,930.00 -
Tile cutter
Voltage:220-240V~50Hz
Input power:1100W
No-load speed:2950rpm
Blade size:250mmx25.4mm
Table size:1060mmx510mm
Max.cutting width:920mm
Max.cutting depth:
45 degree:48mm
90 degree:60mm
Saw body tilting range:0°-45°
Worktable bevel range:0°-45°
Packed by carton box₵9,000.00Tile cutter
₵9,000.00 -
Dinning hall table
The dining room table is a crucial piece of home furniture. It’s both a gathering spot and your room’s focal point.
You should, therefore, shop for a table that complements your dining room’s design as well as your fashion taste and style.
However, with the furniture market flooded with all kinds of dining room tables, choosing the best table can appear quite strenuous.
To find the best dining table, you should consider the table’s material, style and shape.
₵9,000.00Dinning hall table
₵9,000.00 -
Office 4 in 1 workstation
Our 4-in-1 workstation is designed to give you the overall requirement of an ideal workspace in your office environment.
₵9,000.00Office 4 in 1 workstation
₵9,000.00 -
Gasoline power trowel
Gasoline engine
Engine power:4.8Kw(6.5HP)
Weight:78Kgs
Rotor diameter:91cm(36″)
Blade number:four
Finish blade:35X15cm(6X14″)
Blade included
Packed by carton box₵9,290.00Gasoline power trowel
₵9,290.00 -
Dining set
- Table Top Material: Glass
- Chair Frame: Metal
- Table and chairs made from the very best of quality and durable materials
- very comfortable chairs which makes eating more enjoyable
- Seating Capacity: 6 Seater
₵9,500.00Dining set
₵9,500.00 -
Dining set
- Table Top Material: Glass
- Chair Frame: Metal
- Table and chairs made from authentic and beautiful materials
- very affordable
- chairs gives so much comfort and makes eating enjoyable
- Seating Capacity: 6 Seater
₵9,500.00Dining set
₵9,500.00 -
-
Drill press
Voltage:220-240V~50Hz
Input power:1500W
Max.drilling capacity:32mm
No-load speed: 150-2450rpm
Spindle speed settings: 12
Chuck diameter:20mm
Column diameter: 92mm
Table size: 425x475mm
Base size: 500x375mm
Machine height: 1710mm
Machine net weight: 121Kgs
With 1PCS 6″ table vice
Adjustable working table
Packed by carton box₵9,800.00Drill press
₵9,800.00